• The S100 Slave - RF RFM69CW module is a certified Rhomb.io module with a transceiver capable of operation over a wide frequency range, including the 315, 433, 868 and 915 MHz license-free ISM (Industry, Scientific and Medical) frequency bands. All major RF communication parameters are programmable and most of them can be dynamically set. The RF RFM69CW offers the unique advantage of programmable narrow-band and wide-band communication modes. The RFM69CW is optimized for low power consumption while offering high RF output power and channelized operation.
  • Out of stock
    The S100 Slave Grove Module is based on the Grove system, it consists of a base unit (stem) and various modules (twigs) with standardized connectors. The people originating the Grove system (Seeedstudio) have tried to use "stems"and "twigs" as part of the Grove lexicon. After a short period of consideration, we are dropping those names. They just aren't needed and just confuse the issue.
  • Out of stock
    S400 Core Module STM32MP157, a brand new ARM SoC by STMicroelectronics with a very good price/performance ratio. It includes a quad-core processor based on the Cortex-A7 architecture with a maximum clock speed of 650 MHz. The SoC also integrates an ARM Cortex-M4 with FPU/MPU capable to run up to 200 MHz. It includes 1Gb of DDR3L SDRAM.
  • Out of stock
    The S100 Master - ESP-WROOM-02 Module is a certified rhomb.io module that delivers highly integrated Wi-Fi solution to meet users’ continuous demands for efficient power usage, compact design and reliable performance in the Internet of Things industry.
  • The S100 Slave - uSD Holder v1.1 is a certified rhomb.io Slave module that contains a micro SD Holder. Like every Rhomb.io Slave Module, it can be controlled by the rhomb.io Masters.
  • Out of stock
    The S100 Slave - RS-485 Module is a certified rhomb.io Module with two RS-485 transceiver IC that convert UART serial stream to RS-485, a serial communications standard widely used in industry for its simplicity and robustness. Due to the module has two transceivers, you can use two RS-485 buses independently or convert the system in full-duplex, it will depend on the configuration of the assembled resistors.
  • Out of stock
    The S100 Slave - ALS VL6180X is a certified Rhomb.io module that includes proximity and ambient light sensors (ALS) that use the ST's FlightSense technology, that allow absolute distance to be measured independent of target reflectance by combining an IR emitter, a range sensor and an ambient light sensor in a three-in-one ready-touse reflowable package.
  • Out of stock
    The S100 Slave - NB IoT BC95 v1.0 is a certified rhomb.io Slave module that contains a NB-IoT module. It supports multiple frequency bands of B5/B8/B20/B28. It has extremely low power consumption. The main IC of this module is the NB-IoT BC95 provided by Quectel. more information of this IC see the page: http://www.quectel.com/
  • Out of stock
    The LoRa RFM9X module is based on the HopeRF RFM9xW LoRa™ SiP (System in Package) family. Those transceivers feature the LoRa™ long range modem that provides ultra-long range spread spectrum communication and high interference immunity whilst minimizing current consumption. The module can achieve a sensitivity of over -148 dBm and has an internal +20 dBm power amplifier that make it perfect for applications requiring range and robustness. The following table summarizes the main features of the LoRa RFM9X module
  • Out of stock
    The S100 – Headers v1.0 Module is a rhomb.io platform compatible module created to modify and condition the signals of other modules. It works as the interface between two modules which have two different voltage levels. The connection between the signals' supplier and the signals' receiver is done by four connectors: two Headers with twenty pins each one, and the Rhomb.io standard connectors(one receptacle and one plug connector of fifty pins each one). It includes three Voltage Translators (FXMA108), which are used to reconfigure some signals voltage.
  • Out of stock
    The GPS-GPRS SIM868 is a rhomb.io S100 Slave Module that allows GPRS low speed communication and GNSS possitionining. Even more, it has an optional Bluetooth communication interface. The GPRS part, it is quad-band 850/900/1800/1900 MHz GSM/GPRS, with maximun speed of 85.6 kbps, available in eSIM and nanoSIM versions. The GNSS part has a low power consumption performance and supports various location applications including GPS, GLONASS and BEIDOU. About the optional part, it is Bluetooth 3.0 compliant (firmware upgrade required). All three parts has a 50Ω UMCC antenna connector for each one.
  • Out of stock
    The GPRS SIM800 Module is a certified rhomb.io module for GPRS connectivity, available in eSIM and MicroSIM versions include a 50 Ω UMCC antenna connector. It uses the SIM800 chipsed that is quad-band 850/900/1800/1900MHz GSM/GPRS.
  • Out of stock

    eMMC 16GB

    29,31
    The Memory eMMC Module allows you to endow your rhomb.io system with a low power, cheap an easy to use memory. This module has a single eMMC chip memory, a flash storage IC that can be used as the system memory. The only thing that you should do is choose the Memory eMMC Module capacity and connect it on your Rhomb.io device.
  • Out of stock
    The S100 Slave - SPI-CAN MCP2515 Module is a certifiedr rhomb.io Module with a CAN (Controller Area Network) transceiver. It serves as an interface between a CAN protocol controller and the physical two-wire CAN bus. The module also has has a SPI to CAN controller that allows you to add CAN connectivity to your microcontroller with SPI interface.
  • Out of stock
    The S100 Slave - Camera Module with Trully Camera.